November 21, 2013 | Comments Closed
The harmful effects of particulate and moisture contamination in hydraulic and lubrication oils have been well documented. By maintaining absolute fluid cleanliness, end-users can dramatically increase the life of critical wear components on rotational equipment, minimizing downtime and maximizing profitability. We have developed a line of compact Hand Held Filtration Systems intended for use for fluid transfer (new oil from 55-gallon drums) or kidney-loop filtration. They are the most compact, lightweight, and reliable filtration systems in the industry today.
Performance
- Flow Rates Range From 0.5 GPM To 5 GPM
- Particulate Removal – Achieve Very Low Particle Counts As Low As ISO 14/12/9 Utilizing High Efficiency Pleated Microglass Filter Elements Rated Beta(c)>1000 per ISO 16889
- Water Removal – Remove Free Water Utilizing Water-Removal Filter Elements (Absorptive Type)
Standard Features
- Self Priming Positive Displacement Gear Pumps Direct Coupled To TEFC Electric Motors
- NEMA 4 On-Off Switch – 120V, 1-Phase, 60Hz (Other Options Available)
- Inlet Suction Strainer For Pump Protection
- Differential Pressure Gauges For Positive Indication When Filter Elements Are Plugged and Need To Be Changed
- Upstream/Downstream Oil Sample Ports
- All Systems Come Standard With (2) 6 Sections of Heavy Duty Petroleum Transfer Hose and Camlock Connections
- Configurations Include Single or Multiple Spin-On Filter Heads
- Lightweight Aluminum Frame
Optional Features
- Stainless Steel Wands For Use With 55-Gallon Drums
- NEMA 7 Explosion Proof Components
Design for use on:
- Hydraulic Oil
- Turbine Oil
- Lubrication Oil
- Gear Oil (ISO VG 220 ISO VG 680)
- Transformer Oil
- Diesel Fuel
- Phosphate Ester (Fyrquel EHC Fluid)
- PAO Fluid
- Water Glycol (Coolants)
November 21, 2013 | Comments Closed
This was developed to reduce overall operational and maintenance cost associated with contaminated bearings, gear boxes, and other rotational equipment. The end-user is able to purify a system’s lube oil while on-line. This process removes harmful contaminants before they can accumulate and cause problems. Our systems can be designed to filter, lubricate, remove heat, monitor flow, monitor temperature and monitor pressure at the same time to ensure maximum system performance and reliability. They can be equipped to remove particulate and acid in one complete system.
Our Bearing Lubrication and Filtration Systems are recommended for systems that have
- High frequency of bearing failure.
- High mechanical wear due to contaminated lube oil.
- Fluids with high particle counts.
Features
- High efficiency particulate removal elements: Synthetic – inert & inorganic filter media. Removes particles as small as 1/2 micron after one pass.
- Optional heat exchanger: Remove excess heat and reduce equipment and oil temperature. Maximize oil life and control oil oxidation.
- Custom design capability: We custom design our systems to meet the demands of each unique application. Monitor flow, temperature and pressure in one package.
- Heat removal capability: We can incorporate heat exchangers to help lower oil & overall system temperature.
Benefits
- Maximize bearing life
- Extend oil life
- Reduce mechanical component wear
- Reduce downtime
- Achieve the highest degree of preventive maintenance
November 21, 2013 | Comments Closed
The Load Tap Changer Filtration System
(LTCFS) was developed to meet the Electric Utility industry’s need to reduce the overall operational and maintenance costs of Load Tap Changers without sacrificing system reliability. Continuous online filtration of dielectric oil has proven to be a cost-effective means of combating problems associated with LTCs, and transformers retrofitted with our LTC Transformer Oil Filtration System will obtain the following benefits:
- Maintain High Dielectric Strength
- Extended Maintenance Intervals
- Reduced Contact Wear & Coking
- Extended Oil Life
- Reduced Contact Erosion
Features
- Flow Rates Ranging from 1 to 15 GPM with 6 GPM standard
- High Efficiency Particulate / Carbon Removal Filter Element composed of microglass media rated Beta >200 – can remove particles as small as ½ micron in single pass
- Water Removal Element capable of removing up to 0.25 gallons of water
- Differential Pressure Gauges for Positive Indication When Filter Elements Need To Be Changed
- Variable Operation allows for System to be run continuously or at 1-4 intervals per day via solid state timer
- Automatic Safety Shut-Down & Isolation if a leak is detected
- Standard Voltage of 120VAC, Single Phase, 60Hz
- Two 0-60 PSID Gauges to visually see differential pressure between filters
- Two oil sample valves for quick and convenient oil analysis
NB
The LTC Filtration System is recommended for installation on Load Tap Changer Transformers that:
- Operate Near Their Top MVA Rating
- Have High Contact Wear
- Perform At Peak Capacities
- Have A Relatively Small Volume of Insulating Oil
- Experience High Maintenance Costs
November 12, 2013 | Comments Closed
November 12, 2013 | Comments Closed
The harmful effects of particulate and moisture contamination in hydraulic and lubrication oils have been well documented. By maintaining absolute fluid cleanliness, end-users can dramatically increase the life of critical wear components on rotational equipment, minimizing downtime and maximizing profitability.
Oil Filtration Systems, Inc. designs and builds the most effective, durable, and user-friendly vacuum dehydrators on the market today. Special engineered design features maximize the water extraction rates of our oil purifiers, and top-quality components and workmanship ensure years of maintenance-free operation and performance.
Performance
- Flow Rates Range From 1 GPM To 15 GPM
- Particulate Removal – Achieve Very Low Particle Counts As Low As ISO 14/12/9 Utilizing High Efficiency Pleated Microglass Filter Elements Rated Beta(c)>1000 per ISO 16889
- Water Removal – Remove Free Water
- Utilizing Water-Removal Filter Elements (Absorptive Type)
- Acid Removal – Can Be Equipped With Fullers Earth or Activated Alumina Cartridges To Neutralize Acid and Lower TAN
- Varnish Removal – Can Be Equipped With Ion Charged Bonding Cartridges To Remove Insoluble Varnish
Standard Features
Permanent Dispersion Media Inside Vacuum Tower
maximizes water extraction rates, eliminates the need for costly replacement of coalescer filter elements, and enables the system to operate effectively on high viscosity gear oils.
Variable Frequency Drive
enables operator to dial in the optimal flow rate, and enhances the system’s overall performance during cold start-ups, on higher viscosity oils, or when a restricted inlet condition exists.
Variable Frequency Drive
enables operator to dial in the optimal flow rate, and enhances the system’s overall performance during cold start-ups, on higher viscosity oils, or when a restricted inlet condition exists.
Content Goes Here
Content Goes Here
Content Goes Here
- Self Priming Positive Displacement Gear Pumps Direct Coupled To TEFC Electric Motors
- NEMA 4 On-Off Switch – 120V, 1-Phase, 60Hz (Other Options Available)
- Inlet Suction Strainer For Pump Protection
- Differential Pressure Gauges For Positive Indication When Filter Elements Are Plugged and Need To Be Changed
- Upstream/Downstream Oil Sample Ports
- All Systems Come Standard With (2) 12’ Sections of Heavy Duty Petroleum Transfer Hose and Camlock Connections
- Configurations Include Single or Multiple Filter Housings (Spin-On, Cartridge Style Filter Elements, or Bag Filters)
- Available On 2-Wheel Dolly or Compact Skid Base with Push-Rail and (4) Casters or Pneumatic Wheels
Optional Features
- NEMA 4 Electric Control Panel With “Plugged Filter†Indicator Light and Automatic System Shut-Down
- Oil Circulation Heater
- Stainless Steel Wands For Use With 55-Gallon Drums
- Inline Digital Particle Monitor
- NEMA 7 Explosion Proof Components
- Stainless Steel Wetted Parts
- 4-Point Lifting Lug Cage Structure
Designed for Use On
- Hydraulic Oil
- Turbine Oil
- Lubrication Oil
- Gear Oil (ISO VG 220 ISO VG 680)
- Transformer Oil
- Diesel Fuel
- Phosphate Ester (Fyrquel EHC Fluid)
- PAO Fluid
- Water Glycol (Coolants)
November 12, 2013 | Comments Closed
The harmful effects of particulate and moisture contamination in hydraulic and lubrication oils have been well documented. By maintaining absolute fluid cleanliness, end-users can dramatically increase the life of critical wear components on rotational equipment, minimizing downtime and maximizing profitability. We have developed a line of Portable Low-Flow Filtration Systems intended for use for fluid transfer (new oil from 55-gallon drums) or kidney-loop filtration. They are the most reliable, versatile, durable, and user-friendly filter carts in the industry today.
Performance
- Flow Rates Range From 1 GPM To 15 GPM
- Particulate Removal – Achieve Very Low Particle Counts As Low As ISO 14/12/9 Utilizing High Efficiency Pleated Microglass Filter Elements Rated Beta(c)>1000 per ISO 16889
- Water Removal – Remove Free Water
- Utilizing Water-Removal Filter Elements (Absorptive Type)
- Acid Removal – Can Be Equipped With Fullers Earth or Activated Alumina Cartridges To Neutralize Acid and Lower TAN
- Varnish Removal – Can Be Equipped With Ion Charged Bonding Cartridges To Remove Insoluble Varnish
Standard Features
- Self Priming Positive Displacement Gear Pumps Direct Coupled To TEFC Electric Motors
- NEMA 4 On-Off Switch – 120V, 1-Phase, 60Hz (Other Options Available)
- Inlet Suction Strainer For Pump Protection
- Differential Pressure Gauges For Positive Indication When Filter Elements Are Plugged and Need To Be Changed
- Upstream/Downstream Oil Sample Ports
- All Systems Come Standard With (2) 12’ Sections of Heavy Duty Petroleum Transfer Hose and Camlock Connections
- Configurations Include Single or Multiple Filter Housings (Spin-On, Cartridge Style Filter Elements, or Bag Filters)
- Available On 2-Wheel Dolly or Compact Skid Base with Push-Rail and (4) Casters or Pneumatic Wheels
Optional Features
- NEMA 4 Electric Control Panel With “Plugged Filter†Indicator Light and Automatic System Shut-Down
- Oil Circulation Heater
- Stainless Steel Wands For Use With 55-Gallon Drums
- Inline Digital Particle Monitor
- NEMA 7 Explosion Proof Components
- Stainless Steel Wetted Parts
- 4-Point Lifting Lug Cage Structure
Designed for Use On
- Hydraulic Oil
- Turbine Oil
- Lubrication Oil
- Gear Oil (ISO VG 220 ISO VG 680)
- Transformer Oil
- Diesel Fuel
- Phosphate Ester (Fyrquel EHC Fluid)
- PAO Fluid
- Water Glycol (Coolants)
November 12, 2013 | Comments Closed
The harmful effects of particulate and moisture contamination in hydraulic and lubrication oils have been well documented. By maintaining absolute fluid cleanliness, end-users can dramatically increase the life of critical wear components on rotational equipment, minimizing downtime and maximizing profitability. We have developed a line of Portable Low-Flow Filtration Systems intended for use for fluid transfer (new oil from 55-gallon drums) or kidney-loop filtration. They are the most reliable, versatile, durable, and user-friendly filter carts in the industry today.
Performance
- Flow Rates Range From 1 GPM To 15 GPM
- Particulate Removal – Achieve Very Low Particle Counts As Low As ISO 14/12/9 Utilizing High Efficiency Pleated Microglass Filter Elements Rated Beta(c)>1000 per ISO 16889
- Water Removal – Remove Free Water
- Utilizing Water-Removal Filter Elements (Absorptive Type)
- Acid Removal – Can Be Equipped With Fullers Earth or Activated Alumina Cartridges To Neutralize Acid and Lower TAN
- Varnish Removal – Can Be Equipped With Ion Charged Bonding Cartridges To Remove Insoluble Varnish
Standard Features
- Self Priming Positive Displacement Gear Pumps Direct Coupled To TEFC Electric Motors
- NEMA 4 On-Off Switch – 120V, 1-Phase, 60Hz (Other Options Available)
- Inlet Suction Strainer For Pump Protection
- Differential Pressure Gauges For Positive Indication When Filter Elements Are Plugged and Need To Be Changed
- Upstream/Downstream Oil Sample Ports
- All Systems Come Standard With (2) 12’ Sections of Heavy Duty Petroleum Transfer Hose and Camlock Connections
- Configurations Include Single or Multiple Filter Housings (Spin-On, Cartridge Style Filter Elements, or Bag Filters)
- Available On 2-Wheel Dolly or Compact Skid Base with Push-Rail and (4) Casters or Pneumatic Wheels
Optional Features
- NEMA 4 Electric Control Panel With “Plugged Filter†Indicator Light and Automatic System Shut-Down
- Oil Circulation Heater
- Stainless Steel Wands For Use With 55-Gallon Drums
- Inline Digital Particle Monitor
- NEMA 7 Explosion Proof Components
- Stainless Steel Wetted Parts
- 4-Point Lifting Lug Cage Structure
Designed for Use On
- Hydraulic Oil
- Turbine Oil
- Lubrication Oil
- Gear Oil (ISO VG 220 ISO VG 680)
- Transformer Oil
- Diesel Fuel
- Phosphate Ester (Fyrquel EHC Fluid)
- PAO Fluid
- Water Glycol (Coolants)
